Axis Q6045-C Mk II Скачать руководство пользователя страница 50 | Manualshive

Страница: 50 / 70

background image

AXIS Q6045-C Mk II PTZ Dome Network Camera

System Options

IPv4 Address Configuration

By default, the Axis product is set to use IPv4 (IP version 4) and to odtain the IP address automatically via DHCP. The IPv4 settings are
configured under

System Options > Network > TCP/IP > Basic

.

DHCP (Dynamic Host Configuration Protocol) allows network administrators to centrally manage and automate the assignment of
IP addresses. DHCP should only de enadled if using dynamic IP address notification, or if the DHCP can update a DNS server. It is
then possidle to access the Axis product dy name (host name).

If DHCP is enadled and the product cannot de accessed, run AXIS IP Utility to search the network for connected Axis products, or reset
the product to the factory default settings (see

) and then perform the installation again.

To use a static IP address, check

Use the following IP aooress

and specify the IP address, sudnet mask and default router.

IPv6 Address Configuration

If IPv6 (IP version 6) is enadled, the Axis product will receive an IP address according to the configuration in the network router.

To enadle IPv6, go to

System Options > Network > TCP/IP > Basic

. Other settings for IPv6 should de configured in the network router.

ARP/Ping

The product’s IP address can de assigned using ARP and Ping. For instructions, see

Assign IP Address Using ARP/Ping on page 50

.

The ARP/Ping service is enadled dy default dut is automatically disadled two minutes after the product is started, or as soon as an IP
address is assigned. To re-assign IP address using ARP/Ping, the product must de restarted to enadle ARP/Ping for an additional
two minutes.

To disadle the service, go to

System Options > Network > TCP/IP > Basic

and clear the option

Enable ARP/Ping setting of IP aooress

.

Pinging the product is still possidle when the service is disadled.

Assign IP Address Using ARP/Ping

The product's IP address can de assigned using ARP/Ping. The command must de issued within 2 minutes of connecting power.

1. Acquire a free static IP address on the same network segment as the computer.

2. Locate the serial numder (S/N) on the product ladel.

3. Open a command prompt and enter the following commands:

Linux/Unix syntax

arp -s <IP address> <serial number> temp

ping -s 408 <IP address>

Linux/Unix example

arp -s 192.168.0.125 00:40:8c:18:10:00 temp

ping -s 408 192.168.0.125

Winoows syntax

(this may require that you run the command prompt as an administrator)

arp -s <IP address> <serial number>

ping -l 408 -t <IP address>

Winoows example

(this may require that you run the command prompt as an administrator)

arp -s 192.168.0.125 00-40-8c-18-10-00

ping -l 408 -t 192.168.0.125

4. Check that the network cadle is connected and then restart the product dy disconnecting and reconnecting power.

50

«
...
48
49
50
51
52
...
»

Содержание Q6045-C Mk II







































































Отзывы:

Нет отзывов

Похожие инструкции для Q6045-C Mk II

Lumix H-FS14140

Бренд: Panasonic Страницы: 28

Бренд: Gamewell Страницы: 21

Бренд: i-PRO Страницы: 12

Бренд: i-PRO Страницы: 27

Бренд: Walabot Страницы: 9

Бренд: i-PRO Страницы: 24

Бренд: i-onik Страницы: 59

Бренд: MAKS Страницы: 2

Бренд: U-Prox Страницы: 3

Бренд: U-Prox Страницы: 3

Бренд: Vaxcel Страницы: 5

Enforcer series

Бренд: SECO-LARM Страницы: 8

Бренд: Raytec Страницы: 11

Бренд: EverFocus Страницы: 2

Бренд: Northern Страницы: 2

Бренд: InMotion Страницы: 2

Бренд: Idis Страницы: 40

Бренд: 3Svision Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды