Axis Q1615 Mk III, Руководство пользователя

Страница: 28 / 32

AXIS Q1615 Mk III Network Camera
PTZ drivers
PTZ drivers
APTP
This is a list of models supported by this driver. The physical installation depends on your Axis product and the PTZ unit.
Important
Check what serial communication your Axis product and the PTZ unit will support.
Supported models with RS485 2-wire interface:
• AXIS T99A Positioning Unit Series.
For information about compatible Axis products, see axis.com .
Other models may be supported but this has not been verified by Axis.
Technical information
DEFAULT capabilities for PTZ driver:
Driver APTP
Version
1.1.0
DEFAULT serial configuration:
PortMode RS485
BaudRate 115200
DataBits
8
StopBits
1
Parity None
DEFAULT supported capabilities in this PTZ driver:
Note
Different PTZ units may have other capabilities (both less and more).
Movement Absolute Relative Continuous
Pan
yes yes yes
Tilt
yes yes yes
Connection
For the RS485/RS422 pin assignment on your device, see RS485/RS422 connector on page 26 .
To change serial port settings, go to System > Plain config > Serial in the device interface.
Pelco
This is a list of models supported by this driver. The physical installation depends on your Axis product and the PTZ unit.
Important
Check what serial communication your Axis product and the PTZ unit will support.
28