Axis Q1615 Mk III, Руководство пользователя

Страница: 25 / 32

AXIS Q1615 Mk III Network Camera
Specifications
Audio connector
• Audio in – 3.5 mm input for a mono microphone, or a line-in mono signal (left channel is used from a stereo signal).
• Audio out – 3.5 mm output for audio (line level) that can be connected to a public address (PA) system or an active
speaker with a built-in amplifier. A stereo connector must be used for audio out.
Audio input
1 Tip 2 Ring 3 Sleeve
Balanced microphone (with or without phantom power)
or line, “hot” signal Balanced microphone (with or without phantom
power) or line, “cold” signal
Ground
Audio output
1 Tip 2 Ring
3 Sleeve
Channel 1, unbalanced line, mono Channel 1, unbalanced line, mono Ground
I/O connector
Use the I/O connector with external devices in combination with, for example, motion detection, event triggering, and alarm
notifications. In addition to the 0 V DC reference point and power (DC output), the I/O connector provides the interface to:
Digital input - For connecting devices that can toggle between an open and closed circuit, for example PIR sensors, door/window
contacts, and glass break detectors.
Supervised input - Enables possibility to detect tampering on a digital input.
Digital output - For connecting external devices such as relays and LEDs. Connected devices can be activated by the VAPIX®
Application Programming Interface, through an event or from the product’s webpage.
6-pin terminal block
Function Pin Notes Specifications
DC ground
1
0 V DC
DC output
2
Can be used to power auxiliary equipment.
Note: This pin can only be used as power out. 12 V DC
Max load = 50 mA
25