Axis P1367-E, Руководство по установке

Страница: 21 / 178

AXIS P1367-E Network Camera
• Chrome
TM
(recommended), Firefox
®
, Edge
®
, or Opera
®
with Windows
®
• Chrome
TM
(recommended) or Safari
®
with OS X
®
• Chrome
TM
or Firefox
®
with other operating systems.
For more information about using the product, see the User Manual available at www.axis.com
How to adjust focus and zoom
If the camera is mounted so that you cannot look at the image and access the lens at the same
time, use the Focus Assistant, see
How to adjust focus with the Focus Assistant .
1. Go to the Image tab in the product's webpage.
2. Click Autofocus .
3. Loosen the zoom and focus pullers on the lens by turning them counter-clockwise. See
Product overview .
4. Move the pullers to set zoom and focus and check the quality of the image in the image
window.
5. Re-tighten the zoom and focus pullers.
6. Click
Autofocus .
How to adjust focus with the Focus Assistant
Note
• The view in front of the camera should not be changed during focus adjustment. If the
camera is moved, or if a finger or other object is placed in front of the lens, restart the
procedure.
• If movements in front of the camera cannot be avoided, the Focus Assistant should not
be used.
• If the control button is not released within two seconds, AXIS Internet Dynamic DNS
Service is enabled instead of the Focus Assistant. For more information about AXIS
Internet Dynamic DNS Service, see
www.axis.com .
If the Status LED flashes either red or amber before you are able to adjust the lens, exit the Focus
Assistant and restart the procedure. See
Status LED behavior for focus assistant on page 25 .
1. Mount or place the camera so that it cannot be moved.
2. Loosen the zoom puller by turning it anti-clockwise. Move the puller to set the zoom
level. Retighten the zoom puller.
3. Set the camera to its extreme distant-focus position by loosening the focus puller and
turning the focus ring fully clockwise.
4. Gently turn the focus ring anti-clockwise until it stops.
5. Turn the focus ring slowly clockwise until the status indicator flashes green.
6. Re-tighten the focus puller.
21
EN