Axis M5525-E Скачать руководство пользователя страница 18

Страница: 18 / 20

AXIS M5525–E PTZ Network Camera

Specifications

To find the latest version of the product’s datasheet, go to the product page on

axis.com

and locate

Support & Documentation

LED indicators

Status LED

Indication

Unlit

Connection and normal operation.

Green

Shows steady green for 10 seconds for normal operation after startup completed.

Amber

Steady during startup. Flashes during firmware upgrade or reset to factory default.

Amber/Red

Flashes amber/red if network connection is unavailable or lost.

SD card slot

NOTICE

TICE

• Risk of damage to SD card. Do not use sharp tools, metal objects, or excessive force when inserting or removing the

SD card. Use your fingers to insert and remove the card.

• Risk of data loss and corrupted recordings. Do not remove the SD card while the product is running. Unmount the SD card

from the product’s webpage before removal.

This product supports microSD/microSDHC/microSDXC cards (not included).

For SD card recommendations, see

axis.com

Buttons

Control button

The control button is used for:

•

Resetting the product to factory default settings. See

How to reset to factory default settings on page 15

•

Connecting to an AXIS Video Hosting System service. To connect, press and hold the button for about 3 seconds until the
status LED flashes green.

Connectors

Network connector

RJ45 Ethernet connector with Power over Ethernet (PoE).

Audio connector

4-pin terminal block for audio input and output. See

Product overview on page 3

For audio in, the left channel is used from a stereo signal.

Pin

Notes

AUDIO IN

Microphone or line in (mono)

Содержание M5525-E





















Результаты поиска

Содержание M5525-E

Отзывы:

Похожие инструкции для M5525-E

Бренды по названию

Популярные бренды

Axis M5525-E, Руководство пользователя

Результаты поиска

Содержание M5525-E

Отзывы:

Похожие инструкции для M5525-E

Бренды по названию

Популярные бренды