AXIS M5525–E PTZ Network Camera
Setup
Create action rules
For the camera to open the gate when the PIR detector senses someone nearby, you need to create an action rule in the camera:
1. Go to
System
>
Events
>
Action rules
.
2. Click
Add
.
3. Give the action rule a name, for example “Open gate”.
4. From the
Trigger
drop-down list, select
Input signal
.
5. Select
Digital input signal
.
6. Select ”PIR detector”, in this example connected to port 1.
7. Under
Actions
, select
Output port
from the
Type
drop-down list.
8. From the
Port
drop-down list, select “Gate switch” .
9. Click
Ok
.
10. Create another action rule with the name “Direct the camera to the gate"
11. Select the same input signal as before, but as action select the previously created “Gate entrance” preset position.
12. Click
Ok
.
Applications
About applications
AXIS Camera Application Platform (ACAP) is an open platform that enables third parties to develop analytics and other applications
for Axis products. To find out more about available applications, downloads, trials and licenses, go to
axis.com/applications
To find the user manuals for Axis applications, go to
axis.com
Note
• Several applications can run at the same time but some applications might not be compatible with each other. Certain
combinations of applications might require too much processing power or memory resources when run in parallel. Verify
that the applications work together before deployment.
14
