Axis M5065 Скачать руководство пользователя страница 60

Страница: 60 / 62

AXIS M5065 PTZ Network Camera

Specifications

To find the latest version of the product’s datasheet, go to the product page at

axis.com

and locate

Support & Documentation

LED Indicators

Note

• The Status LED can be configured to flash while an event is active.

• The Status LED can be configured to flash for identifying the unit. Go to

Settings > System > Plain config

Status LED

Indication

Unlit

Connection and normal operation.

Green

Shows steady green for 10 seconds for normal operation after startup completed.

Amber

Steady during startup. Flashes during firmware upgrade or reset to factory default.

Amber/Red

Flashes amber/red if network connection is unavailable or lost.

SD card slot

NOTICE

TICE

• Risk of damage to SD card. Do not use sharp tools, metal objects, or excessive force when inserting or removing the

SD card. Use your fingers to insert and remove the card.

• Risk of data loss and corrupted recordings. Do not remove the SD card while the product is running. Unmount the SD card

from the product’s webpage before removal.

This product supports microSD/microSDHC/microSDXC cards.

For SD card recommendations, see

axis.com

microSD, microSDHC, and microSDXC Logos are trademarks of SD-3C LLC. microSD, microSDHC, microSDXC are

trademarks or registered trademarks of SD-3C, LLC in the United States, other countries or both.

Buttons

Control button

For location of the control button, see

Hardware overview on page 5

The control button is used for:

•

Resetting the product to factory default settings. See

page 55

•

Connecting to an AXIS Video Hosting System service. See

page 47

. To connect, press and hold the button for about 3

seconds until the Status LED flashes green.

•

Connecting to AXIS Internet Dynamic DNS Service. See

page 47

. To connect, press and hold the button for about 3 seconds.

Содержание M5065































































Результаты поиска

Содержание M5065

Отзывы:

Похожие инструкции для M5065

Бренды по названию

Популярные бренды

Axis M5065, Руководство пользователя

Результаты поиска

Содержание M5065

Отзывы:

Похожие инструкции для M5065

Бренды по названию

Популярные бренды