AXIS M1143-L/M1144-L
Page 11
EN
GL
IS
H
Assign IP addresses in multiple devices
AXIS Camera Management speeds up the process of assigning IP
addresses to multiple devices, by suggesting IP addresses from a
specified range.
1. Select the devices you wish to configure (different models can be
selected) and click the
Assign IP
button
.
2. Select
Assign the following IP address range
and enter the range
of IP addresses, the subnet mask and default router the devices will
use.
3. Click the
OK
button.
Set the password
To gain access to the product, the password for the default administrator
user root must be set. This is done in the ‘Configure Root Password’
dialog, which is displayed when the AXIS M1143-L/M1144-L network
camera is accessed for the first time.
To prevent network eavesdropping when setting the root password, this
can be done via an encrypted HTTPS connection, which requires an
HTTPS certificate (see note below).
To set the password via a standard HTTP connection, enter it directly in
the first dialog shown below.
To set the password via an encrypted HTTPS connection, follow these
steps:
1. Click the
Create self-signed certificate
button.
2. Provide the requested information and click
OK
. The certificate is
created and the password can now be set securely. All traffic to and
from the AXIS M1143-L/M1144-L is encrypted from this point on.
