Axis M1103 Скачать руководство пользователя страница 38

Страница: 38 / 49

AXIS M1103

System Options

Select

Always Multicast Video

to start multicast streaming without opening an RTSP session.

Bonjour

The Axis product includes support for Bonjour. Bonjour is enabled by default and the product is automatically detected by operating

systems and clients that support this protocol.

Bonjour can be disabled under

System Options > Network > Bonjour

Storage

Network Share

Network share allows you to add network storage such as a NAS (Network Attached Storage) or any server that uses CIFS (Common

Internet File System) and use them for storage of recordings.

To add a network share:

1. Go to

System Options > Storage

2. Click

Network Share

3. Enter the IP address, DNS or Bonjour name to the host server in the

Host

eld.

4. Enter the name of the share in the

Share

eld.

5. If required, select

The share requires login

and enter the user name and password.

6. Click

Connect

To clear all recordings and data from the Axis product’s folder on the designated share, click

Clear

under

Storage Tools

To avoid

lling the share, it is recommended to remove recordings continuously. Under

Recording Settings

, select

Remove recordings

older than

and select the number of days or weeks.

To stop writing to the share and protect recordings from being removed, select

Lock

under

Recording Settings

Maintenance

The Axis product provides several maintenance functions. These are available under

System Options > Maintenance

Click

Restart

to perform a correct restart if the Axis product is not behaving as expected. This will not affect any of the current

settings.

Click

Restore

to reset most settings to the factory default values. The following settings are not affected:

• the boot protocol (DHCP or static)

• the static IP address

• the default router

• the subnet mask

• the system time

• the IEEE 802.1X settings

Click

Default

to reset all settings, including the IP address, to the factory default values. This button should be used with caution. The

Axis product can also be reset to factory default using the control button, see

Reset to Factory Default Settings, on page 40

Содержание M1103


















































Результаты поиска

Содержание M1103

Отзывы:

Похожие инструкции для M1103

Бренды по названию

Популярные бренды

Axis M1103, Руководство пользователя

Результаты поиска

Содержание M1103

Отзывы:

Похожие инструкции для M1103

Бренды по названию

Популярные бренды