Axis M1103 Скачать руководство пользователя страница 34

Страница: 34 / 49

AXIS M1103

System Options

IPv4 Address Con

guration

By default, the Axis product is set to use IPv4 (IP version 4) and to obtain the IP address automatically via DHCP. The IPv4 settings are

con

gured under

System Options > Network > TCP/IP > Basic

DHCP (Dynamic Host Con

guration Protocol) allows network administrators to centrally manage and automate the assignment of

IP addresses. DHCP should only be enabled if using dynamic IP address noti

cation, or if the DHCP can update a DNS server. It is

then possible to access the Axis product by name (host name).

If DHCP is enabled and the product cannot be accessed, run AXIS IP Utility to search the network for connected Axis products, or reset

the product to the factory default settings (see

page 40

) and then perform the installation again.

To use a static IP address, check

Use the following IP address

and specify the IP address, subnet mask and default router.

IPv6 Address Con

guration

If IPv6 (IP version 6) is enabled, the Axis product will receive an IP address according to the con

guration in the network router.

To enable IPv6, go to

System Options > Network > TCP/IP > Basic

. Other settings for IPv6 should be con

gured in the network router.

ARP/Ping

The IP address can be set using ARP and Ping. For instructions, see the product’s Installation Guide.

ARP/Ping is enabled by default. To disable, uncheck the box under

System Options > Network > TCP/IP > Basic

The ARP/Ping service is automatically disabled two minutes after the product is started, or as soon as an IP address is set. To reset the

IP address, the product must be restarted to activate ARP/Ping for an additional two minutes.

Pinging the product is still possible when this service is disabled.

AXIS Video Hosting System (AVHS)

AVHS used in conjunction with an AVHS service, provides easy and secure Internet access to live and recorded video accessible from

any location. For more information and help to

nd a local AVHS Service Provider go to www.axis.com/hosting

AVHS is enabled by default. The settings are con

gured under

System Options > Network > TCP IP > Basic

One-click enabled -

Press the product’s control button (see

Hardware Overview, on page 4

) to connect to an AVHS service over the

Internet. Once registered,

Always

will be enabled and the Axis product stays connected to the AVHS service. If the product is not

registered within 24 hours from when the button is pressed, the product will disconnect from the AVHS service.

Always -

The Axis product will constantly attempt to connect to the AVHS service over the Internet. Once registered the product will

stay connected to the service. This option can be used when the product is already installed and it is not convenient to use the

one-click installation.

AXIS Internet Dynamic DNS Service

AXIS Internet Dynamic DNS Service assigns a host name for easy access to the product. For more information, see www.axiscam.net

To register the Axis product with AXIS Internet Dynamic DNS Service, go to

System Options > Network > TCP/IP > Basic

. Under

Services

, click the AXIS Internet Dynamic DNS Service

Settings

button (requires access to the Internet). The domain name currently

registered at AXIS Internet Dynamic DNS service for the product can at any time be removed.

Advanced TCP/IP Settings

DNS Con

guration

DNS (Domain Name Service) provides the translation of host names to IP addresses. The DNS settings are con

gured under

System

Options > Network > TCP/IP > Advanced

Содержание M1103


















































Результаты поиска

Содержание M1103

Отзывы:

Похожие инструкции для M1103

Бренды по названию

Популярные бренды

Axis M1103, Руководство пользователя

Результаты поиска

Содержание M1103

Отзывы:

Похожие инструкции для M1103

Бренды по названию

Популярные бренды