AXIS D4100-E Network Strobe Siren
Configure your device
1. Go to
System
>
Events
and add a rule.
2. Type a name for the rule.
3. In the list of conditions, select
Call
>
State
.
4. In the list of state, select
Active
.
5. In the list of actions, select
Run light and siren profile while the rule is active
.
6. Select the profile you want to start.
7. Click
Save
.
Run two profiles with different priorities
If you run two profiles with different priorities, the profile with a higher priority number will interrupt the profile with a lower
priority number.
Note
If you run two profiles with the same priority, the most recent profile will cancel the previous one.
This example explains how to set the device to show one profile with priority 4 over another profile with priority 3 when triggered by
the digital I/O port.
Create profiles:
1. Create a profile with priority 3.
2. Create another profile with priority 4.
Create a rule:
1. Go to
System
>
Events
and add a rule.
2. Type a name for the rule.
3. In the list of conditions, select
I/O
>
Digital input
.
4. Select a port.
5. In the list of actions, select
Run light and siren profile while the rule is active
.
6. Select the profile that has the highest priority number.
7. Click
Save
.
8. Go to
Profiles
and start the profile with the lowest priority number.
Activate strobe siren when camera detects motion
This example explains how connect a camera to the strobe siren, and activate a profile in the strobe siren whenever the application
AXIS Motion Guard, installed in the camera, detects motion.
Prerequisites
•
Create a new user with the role Operator or Administrator in the strobe siren.
•
Create a profile in the strobe siren.
•
Set up AXIS Motion Guard in the camera and create a profile called “Profile A”.
Create two recipients in the camera
8