AXIS D4100-E Network Strobe Siren
Configure your device
2. Click
Export
.
3. Browse to locate the .json files.
Set up rules for events
To learn more, check out our guide
Get started with rules for events
Trigger an action
1. Go to
System > Events
and add a rule. The rule defines when the device will perform certain actions. You can set
up rules as scheduled, recurring, or manually triggered.
2. Enter a
Name
.
3. Select the
Condition
that must be met to trigger the action. If you specify more than one condition for the rule, all of the
conditions must be met to trigger the action.
4. Select which
Action
the device should perform when the conditions are met.
Note
If you make changes to an active rule, the rule must be turned on again for the changes to take effect.
Start a profile when an alarm is triggered
This example explains how to trigger an alarm when the digital input signal is changed.
Set direction input for the port:
1. Go to
System
>
Accessories
>
I/O ports
.
2. Go to
Port 1
>
Normal position
and click
Circuit closed
.
Create a rule:
1. Go to
System
>
Events
and add a rule.
2. Type a name for the rule.
3. In the list of conditions, select
I/O
>
Digital input
.
4. Select
Port 1
.
5. In the list of actions, select
Run light and siren profile while the rule is active
.
6. Select the profile you want to start.
7. Click
Save
.
Start a profile via SIP
This example explains how to trigger an alarm with SIP.
Activate SIP:
1. Go to
System
>
SIP
>
SIP settings
.
2. Select
Enable SIP
and
Allow incoming calls
.
3. Click
Save
.
Create a rule:
7