AXIS D2050-VE Network Radar Detector
Setup
3. From the list of triggers, select
Detectors
and then select one of the
RMD
(Radar Motion Detection) include zones. To set
up an include zone, see
Add an include zone on page 12
4. From the list of actions, select
Record video
.
5. Select an existing stream profile or create a new one.
6. Set the pre-trigger time to 5 seconds.
7. Set the post-trigger time to 60 seconds.
8. Select
SD card
from the list of storage options.
9. Click
Ok
.
How to turn on a light when motion is detected
Turning on a light when an intruder enters the detection zone can have a deterring effect, and will also improve the image quality of
a visual camera recording the intrusion.
This example explains how to set up the detector and an illuminator so that the illuminator turns on when the detector detects
motion and turns off after one minute.
Connect the devices:
1. Connect one of the illuminator cables to the power supply via the relay port on the detector. Connect the other cable
directly between the power supply and the illuminator.
Configure the relay port of the detector:
2. Go to
Settings > System > I/O ports
and select
Open circuit
as the normal state.
Create an action rule in the detector:
3. Go to
Settings > System > Events
and add an action rule.
4. Type a name for the action rule.
5. From the list of triggers, select
Detectors
and then select one of the
RMD
(Radar Motion Detection) include zones. To set
up an include zone, see
Add an include zone on page 12
6. From the list of actions, select
Output Port
and then select the relay port.
7. Select
Active
.
8. Set the
Duration
to
Go to opposite state after 1 minute
.
9. Click
Ok
.
How to control a PTZ camera with the detector
It is possible to use the information about objects’ positions from the detector to make a PTZ camera track objects.
To do this, install the application AXIS Radar Autotracking for PTZ on your VMS server (or another computer with access to both the
camera and the detector), and follow the instructions in the application.
To download AXIS Radar Autotracking for PTZ, go to
axis.com
About detection zones
To determine where to detect motion, you can add multiple zones. Different zones can be used to trigger different actions.
11
