AXIS C8210 Network Audio Amplifier
Specifications
SD card slot
NO
NO
NOTICE
TICE
TICE
• Risk of damage to SD card. Do not use sharp tools, metal objects, or excessive force when inserting or removing the
SD card. Use your fingers to insert and remove the card.
• Risk of data loss and corrupted recordings. Do not remove the SD card while the product is running. Unmount the SD card
from the product’s webpage before removal.
For SD card recommendations, see
.
microSD, microSDHC, and microSDXC Logos are trademarks of SD-3C LLC. microSD, microSDHC, microSDXC are
trademarks or registered trademarks of SD-3C, LLC in the United States, other countries or both.
Buttons
Control button
Press the control button to perform an impedance test. Press and hold the control button until you hear tones from the speaker. See
for more information.
Connectors
Network connector
RJ45 Ethernet connector with Power over Ethernet Plus (PoE+).
NO
NO
NOTICE
TICE
TICE
The product shall be connected using a shielded network cable (STP). All cables connecting the product to the network shall
be intended for their specific use. Make sure that the network devices are installed in accordance with the manufacturer’s
instructions. For information about regulatory requirements, see the Installation Guide at
www.axis.com
.
Audio connector
•
Audio in
– 3.5 mm input for a mono microphone, or a line-in mono signal (left channel is used from a stereo signal).
1 Tip
2 Ring
3 Sleeve
Audio Input
Microphone/Line in
Microphone bias voltage
Ground
2-pin terminal block for speaker out.
Function
Pin
Notes
Speaker out (-)
1
Speaker out (+)
2
38
