OPERATION MANUAL
13
__________________________________________________________________________________________________________________
Change/write a sample mass by numeric keys:
During a pieces counting (indicator
PCS
) user can change actual sample mass.
Write a sample mass when a counting process is turn-off initiate a counting
process.
1. Press a
→
→
→
→
SPW
key
.
2. Write sample mass by using a numeric keys and
ENTER
.
3. Number of details has been showed on right display with
PCS
indicator
.
A
sample mass has been showed in centered display with
APW.
4. Result of calculation is read from right display.
Note:
1. It is advised that single piece weight is not less than one reading unit and
sample weight used in first phase is bigger than 100 reading units
.
2. Err-PCS communicate signalizes that a sample was not put on the pan or
single piece weight is less than one reading unit (it is possible to count pieces but
measuring error is bigger).
