OPERATION MANUAL
11
__________________________________________________________________________________________________________________
10. Start of work
Leave the pan empty, plug the feeder to the mains (~230V/50Hz) and plug the
feeder connector to the 12V power socket at the bottom side of the scale.
Scale will execute following step:
- test of electronic components,
- display type of scale and version of program,
- zeroing the indication.
After displayed an indication on the main (left) display scale is ready to work.
11. Pieces counting (PCS)
Scale enables to count identical pieces, e.g. turnbuckles or buttons
Measurement with single pieces putting on pan:
A measurement is performed in two phases:
- first phase - single piece weight calculation on the basis of defined pieces amount
(default is 10 pieces.),
- second phase – pieces counting
1. Put on pan quantified details sample.
2. Turn a counting by press
→
→
→
→
PCS+
key
.
3. If the quantified sample consists 10 pieces press
ENTER
(solid line on the
drawing). If amount of detail is other write correct value by using numeric
keys and
ENTER
(dotted line on the drawing).
4. Number of details has been showed on right display with
PCS
indicator
.
A
sample mass has been showed in centered display with
APW
indicator.
5. Remove ample form pan and put o portion of pieces.
6. Result of calculation is read from right display.
