Axis B/E Series Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 56

Axis B/E Series Скачать руководство пользователя страница 8

8

USER MANUAL

_____________________________________________________________________________________________________________________

7.

Preparation

1.

Take the scale out of the package
removing protective foils.

2.

Take a pan off and remove protective
elements from below the pan.

3.

Place the scale on a stable ground not
affected by mechanical vibrations and
airflows.

4.

Level the scale with the rotating rear legs
so that the air bubble in the water-level at
the back of the scale is in the middle. Lock
the legs with the nut.

5.

Put on the pan.

6.

In scales with the indicator connected with
the  platform  with  the  cable  (optional),
mount  the  indicator  on  the  wall  or  a
desktop so that weighing results are easily
and  clearly  visible  (suggested  mounting
positions at the picture at the left).

7.

Plug the feeder connector to the power
socket at the back of the scale and plug the
feeder to the mains. After self-tests and
result stabilisation, the scale displays zero
indication.

Correct

Wrong

«
...
6
7
8
9
10
...
»

Содержание B/E Series

























































Отзывы:

Нет отзывов