Axis AXIS 5900, Быстрое руководство по установке

Страница: 7 / 24

AXIS 5900 Installation Overview 7
Installation Overview
Select the appropriate method to establish a connection between the workstation / laptop
and the AXIS 5900. The tables below provide an overview of the installation procedures:
Setting up using the Ethernet interface
Setting up over the WLAN
Before you begin, configure the WLAN settings on your workstation / laptop as described
below (
refer to the user documentation of your WLAN network interface for instructions
):
•
Select
ad hoc mode
•
Set the SSID to AXIS followed by the last 6 digits of the serial number which is found on the underside label of
the AXIS 5900 e.g. AXIS181636. The SSID is case sensitive and must be entered exactly as stated above i.e. in
upper-case letters.
•
Set the
WLAN channel
to
11
(channel
14
in Japan)
•
Disable the
WEP
parameter
Proceed with the following:
Note:
Description Action...
To establish communication with the network, an IP address must
be assigned to your AXIS 5900
IP address assignment
on page 8
Set the WLAN Network Mode and enter the SSID , WLAN
channel and WEP keys according to your network
Configuring the AXIS 5900 for wireless
printing
on page 12
On power up, the AXIS 5900 will automatically select WLAN
communication if there is no Ethernet cable connected Disconnect the network cable
The AXIS 5900 must be restarted for the WLAN settings to take
effect Disconnect and reconnect the AXIS 5900
power supply
Description Action...
To establish communication with the network, an IP address must
be assigned to your AXIS 5900
IP address assignment
on page 8
Once the connection has been established, set the WLAN
Network Mode
and enter the
SSID
,
WLAN channel
and
WEP
keys
according to your network
Configuring the AXIS 5900 for wireless
printing
on page 12
The AXIS 5900 must be restarted for the WLAN settings to take
effect Disconnect and reconnect the AXIS 5900
power supply
Once the print server’s connection to the network has been established and verified, you can reset the
workstation / laptop to its original settings i.e. the network mode, SSID, WLAN channel and WEP keys