Axis AXIS 5900, Быстрое руководство по установке

Страница: 13 / 24

AXIS 5900 Configuring the AXIS 5900 for wireless printing 13
5. To access the WLAN settings page, click Network Settings | Detailed View | WLAN
WLAN Parameters
Refer to the table below for a description of the WLAN parameter settings used to configure the
AXIS 5900 for wireless printing:
WLAN Parameters Description
WLAN Node Address The WLAN node address that is identical to the AXIS 5900 serial number which is
found on the underside label on the print server, e.g.
Note:
Ser.No: 00:40:8C:18:16:36
WLAN Node Address: 00 40 8C 18 16 36
WLAN Network Speed Select the appropriate network speed according to your network environment or
select Auto Sense
WLAN Network Mode Select Ad Hoc mode for peer to peer printing or Infrastructure mode for wireless
communication via an access point.
Note: The WLAN Network Mode must match the mode of the workstation /
laptop. This is set using the computer’s wireless configuration software.
WLAN SSID The default SSID (service set identifier) in the AXIS 5900 is ’AXIS’ followed by the
last six digits of the serial number, e.g. AXIS181636
Note: the SSID must match the SSID of the WLAN network interface. This is set
using the computer’s wireless configuration software.
WLAN Channel The default setting is channel 11 (Japan - channel 14)
WLAN Fragmentation
Threshold These parameters are used to optimize the data transmission in accordance with
the IEEE 802.11b standard.
WLAN RTS Threshold
Detailed View
Network
Settings
Help