41
AXIS 207W/AXIS 207MW - System Options
Resetting to the Factory Default Settings
To reset the camera to the original factory default settings, go to the
System Options >
Maintenance
web page (as described in
Maintenance,
on page 39) or use the
Control
button
on the underside of the camera
(see page 6) as described below:
Using the Control Button
To reset the camera to the factory default settings using the Control Button:
1. Disconnect the power adapter.
2. Press and hold the Control button while reconnecting the power.
3. Keep the Control button pressed until the
Status Indicator
color changes to amber
(this may take up to 15 seconds).
4. Release the Control button.
5. When the Status Indicator changes to Green (which may take up to 1 minute), the
process is complete and the camera has been reset. The unit will now have the
default IP address 192.168.0.90, or if the network uses a DHCP server, it will have
a new dynamic IP address.
Advanced
Scripting is an advanced function that provides the possibility to customize and use
scripts. This function is a very powerful tool.
Caution!
Improper use may cause unexpected behavior or even cause loss of contact with the
unit. If a script does cause problems, reset the unit to its factory default settings. A
backup file may be of use to return the unit to its latest configuration.
Axis strongly recommends that you do not use this function unless you fully
understand the consequences.
Note that Axis support does not provide assistance for
problems with customized scripts.
For more information, please visit the Developer pages at www.axis.com/developer
Plain Config
- this function is for the advanced user with experience of Axis network
camera configuration. All parameters can be set and modified from this page. Help is
available from the standard help pages.
