10
USER MANUAL
____________________________________________________________________________________________________________________
8. Preparing balance to work
1.
Take the balance, the feeder and mechanical elements of the pan out. It is
recommended to keep the original scale package in order to transport the balance
safely in future.
2.
Place the balance on a stable ground not affected by mechanical vibrations and
airflows.
3.
Level the balance with
rotating legs
6
so that the
air bubble in water level
7
at the back of the balance is
in the middle.
4.
(for AG100-AG600) Gently
insert the mandrel of pan
support
2
into balance
mechanism socket through
the pan ring 3 and the pan
1
on (AG600 balances have
not the pan ring).
5.
(for
AG1000-AG4000)
Place nuts
2
on mandrels
that are visible in balance
cover holes, put the pan
1
on nuts.
6. If the balance was taken from a lower temperature surrounding to
a room with higher temperature, e.g. in winter, moisture can liquefy on
the balance casing. Do not connect power supply to the balance, because
this can cause damage or improper work of the balance. In this case leave
the balance for at least 4 hours unplugged for acclimatization.
7
6
1
2
3
7
6
1
2
