Management and Configuration
AXIS 5550 User’s Manual
93
Editing the
config
file
Follow the instructions below to edit the
config
file using FTP:
1. Log in to the Axis Network Print Server by typing:
ftp <host name>
or
ftp <IP address>
in a DOS window (Windows)
or in a UNIX shell.
2. Enter the user id and the password. (The default entries are
root
and
pass
.)
3. Download the
config
file to your host by typing:
get config
4. Edit the file using your preferred text editor.
5. Save
the
config
file to the Axis Network Print Server by typing:
put config CONFIG
Notes:
The example below describes how to upload and download the
config
file
using FTP from a DOS window.
Example:
• It is important that the destination file is specified in capital letters. Otherwise the edits
are temporary and will be lost once the Axis Network Print Server has been powered off.
• To edit the
config
file from a Macintosh you will need FTP support such as MacTCP, Fetch
or Anarchie. The procedure for editing the file is the same as described above.
>
ftp npserver
connected to npserver.
220 AXIS 5550 FTP Network Print Server v7.10 Sep 06
2006 ready.
Name (npserver:(none)):
root
331 User name ok, need password
Password:
pass
(not visible)
230 User logged in
ftp>
get config
200 PORT command successful.
150 Opening data connection for config
(192,168,0,10,4,64), (mode ascii).
226 Transfer complete.
ftp: 10527 bytes received in 0.22Seconds 47.85
Kbytes/sec)
ftp>
put config CONFIG
200 PORT command successful.
150 Opening data connection for CONFIG
(192,168,0,10,4,65), (mode ascii).
226 Transfer complete.
10527 bytes received in 0.22Seconds 47.85 Kbytes/sec)
ftp>
bye
221 Goodbye.
>
