Adding Printers in NetWare
48
AXIS 5550 User’s Manual
9. You will find the print server in the next window with the printer attached
on the connected port. Depending on the transport protocol you used when
you start the installation, the print server should appear as following:
• TCP/IP Network protocol:
IP Address and Port
,
e.g:
192.168.70.243
and
LPT1
Only the ports with a connected printer show up in this window. If
the printer is not in the displayed print list, click
Manually specify
the print server
and do the following: Enter the print server’s IP
address in the
IP Address
field and choose a port in the
Print Server
Port
field:
e.g., 192.168.70.243 and LPT1
The port numbers are USB1 or LPT1; “other/unknown” denotes the
USB1 port.
IPX Network protocol:
All the available ports will be presented, regardless if the printers are
or not connected to those ports, e.g.
AXIS5FF66A_P1
corresponds to the
LPT1
port, and
AXIS5FF66A_P2
corresponds to the
USB1
port.
The IPX Addresses for the above printers will appear as:
<IPX External Network Number>:<Print server’s HW
Ports available
USB port
Parallel port
AXIS 5550
other/unknown
parallel
