38
AXIS 216FD/FD-V - System Options
Domain name
- enter the domain(s) to search for the host name used by the AXIS
216FD/FD-V. Multiple domains can be separated by semicolons (;). The host name is
always the first part of a Fully Qualified Domain Name, e.g.
myserver
is the host name in
the Fully Qualified Domain Name
myserver.mycompany.com
where mycompany.com is
the Domain name.
DNS servers
- enter the IP addresses of the primary and secondary DNS servers.
NTP Configuration
Obtain NTP server address via DHCP
- check this radio button to automatically look up
and use the NTP server settings as provided by DHCP. Click the
View
button to see the
current settings.
Use the following NTP server address -
to make manual settings, check this radio button
and enter the host name or IP address of the NTP server.
Host Name Configuration
The AXIS 216FD/FD-V can be accessed using a host name, instead of an IP address. The
host name is usually the same as the assigned DNS Name.
For more information, please see the
Security
help.
Link-Local Address
This is enabled by default and assigns the AXIS 216FD/FD-V an additional IP address for
use with UPnP
™
. The camera can have both a Link-Local IP and a static/DHCP-supplied IP
address at the same time - these will not affect each other.
HTTP
The default HTTP port number (80) can be changed to any port within the range
1024-65535. This is useful for e.g. simple security port mapping.
NAT traversal (port mapping)
A broadband router allows devices on a private network (LAN) to share a single connection
to the Internet. This is done by forwarding network traffic from the private network to the
“outside” i.e. the Internet. Security on the private network (LAN) is increased since most
broadband routers are pre-configured to stop any attempts to access the private network
(LAN) from the public network/Internet.
