Axis 0664-001, Руководство пользователя

Страница: 11 / 59

AXIS Q3709-PVE Network Camera
Access the Product
The Live View Page
The controls and layout of the Live View page may have been customized to meet specific installation requirements and user
preferences. Consequently, some of the examples and functions featured here may differ from those displayed in your own Live View
page. The following provides an overview of each available control.
Controls on the Live View Page
Click the View size buttons to show the image in full size (right button) or to scale down the image to
fit the browser window (left button).
Select a stream profile for the Live View page from the Stream Profile drop-down list. For information
about how to configure stream profiles, see page 18 .
The Manual Trigger button is used to trigger an action rule from the Live View page. For information
about how to configure and enable the button, see Manual Trigger on page 11 .
Click Snapshot to save a snapshot of the video image. This button is primarily intended for use when
the AXIS Media Control viewer toolbar is not available. Enable this button from Live View Config >
Action Buttons .
The product’s fan is controlled by the ambient temperature and is turned on and off automatically. If
required, the fan can be activated manually by clicking the
Fan button. To show the button, go to
Setup > Live View Config . Under Action Buttons , select Show fan button and specify the number of
minutes the fan should be activated.
The product’s heater is controlled by the ambient temperature and is turned on and off automatically.
If required, the heater can be activated manually by clicking the
Heater button. To show the button,
go to Setup > Live View Config . Under Action Buttons , select Show heater button and specify the
number of minutes the heater should be activated.
Click Divider to display partition lines between the images. This can be useful for instance when
identifying potential blind spots between the images during installation.
Manual Trigger
The Manual Trigger is used to trigger an action rule from the Live View page. The manual trigger can for example be used to
validate actions during product installation and configuration.
To configure the manual trigger:
1. Go to Setup > Events .
2. Click Add to add a new action rule.
3. From the Trigger drop-down list, select Input Signal .
4. From the second drop-down list, select Manual Trigger .
5. Select the desired action and configure the other settings as required.
For more information about action rules, see Events on page 33 .
To show the manual trigger buttons in the Live View page:
11