Axis 02371-001, Руководство пользователя

Страница: 13 / 75

AXIS M32 Dome Camera Series
Configure your device
Set up rules for events
You can create rules to make your device perform an action when certain events occur. A rule consists of conditions and actions.
The conditions can be used to trigger the actions. For example, the device can start a recording or send an email when it detects
motion, or show an overlay text while the device is recording.
To learn more, check out our guide Get started with rules for events .
Trigger an action
1. Go to System > Events and add a rule. The rule defines when the device will perform certain actions. You can set
up rules as scheduled, recurring, or manually triggered.
2. Enter a Name .
3. Select the Condition that must be met to trigger the action. If you specify more than one condition for the rule, all of the
conditions must be met to trigger the action.
4. Select which Action the device should perform when the conditions are met.
Note
If you make changes to an active rule, the rule must be turned on again for the changes to take effect.
Note
If you change the definition of a stream profile that is used in a rule, then you need to restart all the rules that use that
stream profile.
Record video when the camera detects an object
This example explains how to set up the camera to start recording to the SD card five seconds before it detects an object and to
stop one minute after.
Make sure that AXIS Object Analytics is running:
Make sure that AXIS Video Motion Detection is running:
1. Go to Apps > AXIS Object Analytics .
2. Go to Apps > AXIS Video Motion Detection .
3. Start the application if it is not already running.
4. Make sure you have set up the application according to your needs.
Create a rule:
1. Go to System > Events and add a rule.
2. Type a name for the rule.
3. In the list of conditions, under Application , select Object Analytics .
4. In the list of conditions, under Application , select VMD4 .
5. In the list of actions, under Recordings , select Record video while the rule is active .
6. In the list of storage options, select SD_DISK .
7. Select a camera and a stream profile.
8. Set the prebuffer time to 5 seconds.
9. Set the postbuffer time to 1 minute.
13