AXIS Q6315-LE PTZ Camera
Additional settings
Image with WDR.
Note
• WDR can cause artifacts in the image.
• WDR may not be available for all capture modes.
1. Go to
Settings > Image > Wide dynamic range
.
2. Turn on WDR.
3. Use the
Local contrast
slider to adjust the amount of WDR.
4. Use the
Tone mapping
slider to adjust the amount of WDR.
5. If you still have problems, go to
Exposure
and adjust the
Exposure zone
to cover the area of interest.
Find out more about WDR and how to use it at
Verify the pixel resolution
To verify that a defined part of the image contains enough pixels to, for example, recognize license plates, you can use the pixel
counter.
1. Go to
Settings > System > Orientation
.
2. Click
.
3. In the camera’s live view, adjust the size and position of the rectangle around the area of interest, for example where you
expect license plates to appear.
You can see the number of pixels for each of the rectangle’s sides (
X
and
Y
), and decide if the values are enough for
your needs.
Hide parts of the image with privacy masks
You can create one or several privacy masks to hide parts of the image.
8
