5
OPERATING INSTRUCTIONS
1. POWER ON/OFF
Press
POWER ON button
to power the unit. Press and hold
to turn off.
MUTE
If you just press this button briefly, it will turn to MUTE. To return to sound, press it briefly again.
2. SELECT
3. VOLUME UP/DOWN
Turing the VOL knob to right or left (3) to control the VOLUME. To select other functions, hold the
VOL knob down until the desired functions is shown on the display. Figure 1 shows how control func-
tions are selected using the VOL knob.
1
2
3
4
5
SEL
SEL
SEL
SEL
SEL
Fig. 1 Selection of sound control functions
1. VOLUME 2. BASS 3. TREBLE 4. BALANCE 5. FADER
These buttons can be used to adjust the BASS, TREBLE, BALANCE and FADER.
Press and hold VOL knob to adjust below function:
2 sec.
SEL EQ
SEL AVOL
SEL STEREO
SEL LOUD
SEL LOC
SEL
ADJUST
CLOCK
EQ MODE
Turn VOL knob to select one of the settings EQ OFF/FLAT/CLASS/ROCK/POP.
AVOL
Turn the VOL knob to set the volume level, with which the device is to be set when turned on.
STEREO/MONO
When FM signal is weak or distorted, reception may improve by turn VOL knob to select MONO.
LOUDNESS
Turn the VOL knob to the Loudness ON or OFF function.
LOCAL
“Local” position in areas with strong signal will cause radio to stop at only strong stations. During
manual tuning (LOC appears). Select Distant position in areas with weak signal. Turn the “VOL” knob
to set the LOCAL ON/OFF.
ADJUST CLOCK
Turn VOL knob to anti-clockwise for hours and turn VOL knob to clockwise for minutes.
4. PRESET STATIONS (1,2,3,4,5,6)
(A) RADIO MODE:
Six numbered preset buttons store and recall stations for each band.
Storing a station:
1. Select a band (if needed)
2. Select a station
3.
Hold a preset button longer than one second. Preset numbers appear in the display when station is saved.
