![background image](http://html1.mh-extra.com/html/laser/blu-bd1080/blu-bd1080_code-change-manual_677297001.webp)
BLU-BD1080 Region Code Change
DVD Region Encoding
The BLU-BD1080 is region free for the playback of DVD. The BLU-1080 is compatible with
DVDs from all regions. Please check the DVD for the correct language or subtitle content.
Blu-Ray Region Encoding
If the region number of a BD-Video or DVD disc does not correspond to the region number of
this player, this player cannot play the disc.
Changing the Region Code
The region coding of the BLU-BD108 can be changed using the remote control.
•
Remove any disk that may be in
the tray.
•
On the remote control press the
SETUP/HOME button
•
Press 8-5-2-0 on the Numeric
Keypad on the remote. The
Screen shown to the right will be
displayed.
Use the UP/DOWN navigation buttons on the remote control to highlight the disc type you
want to change the region for
DVD Region Change
The BLU-BD1080 is factory preset to Region 0 to play all regions and it is recommended that
the DVD region not be changed unless absolutely necessary.
To change the region, please follow the steps as above and so the DVD Region Code box is
highlighted.
Using the Numeric Keypad on the remote control, press the number of the region code for
the disc to be played.
When the code is set, press the SETUP/MENU button on the remote control to return to the
main screen and play discs as normal.
Acceptable Region codes are
1, 2, 3, 4, 5, 6
or
0.
If the code is set from 1 through 6, only
discs coded for that region can be played and the Region code will need to be reset before
disks from other regions can be played.