AXIOMTEK tBOX510-518-FL-24-110MRDC, Руководство пользователя

Страница: 3 / 59

iii
Safety Precautions
Before getting started, please read the following important safety precautions.
1. Users should not modify any unmentioned jumper setting without Axiomtek FAE
’s
instructions. Any modification without instructions might damage the system.
2. The tBOX510-518-FL-24-110MRDC does not come with an operating system which
must be loaded first before installation of any software into the computer.
3. Be sure to ground yourself to prevent static charge when installing any internal
components. Use a grounding wrist strap and place all electronic components in any
static-shielded devices. Most electronic components are sensitive to static electrical
charge.
4. Disconnect the power cord from the tBOX510-518-FL-24-110MRDC prior to making any
installation. Be sure both the system and all external devices are turned OFF. Sudden
surge of power could ruin sensitive components. Make sure the tBOX510-518-FL-24-
110MRDC is properly grounded.
5. Make sure the voltage of the power source is correct before connecting it to any power
outlet.
6. Turn OFF system power before cleaning. Clean the system using a cloth only. Do not
spray any liquid cleaner directly onto the screen.
7. Do not leave equipment in an uncontrolled environment where the storage temperature
is below -40
℃
or above 80
℃
as it may damage the equipment.
8.
Do not open the system’s back cover. If opening the cover for maintenance is a must,
only a trained technician is allowed to do so. Integrated circuits on computer boards are
sensitive to static electricity. To avoid damaging chips from electrostatic discharge,
observe the following precautions:

Before handling a board or integrated circuit, touch an unpainted portion of the
system unit chassis for a few seconds. This will help discharge any static electricity
on the human body.

When handling boards and components, wear a grounding wrist strap available
from most electronic component stores.