AXIOMTEK SBC82610 SERIES, Руководство пользователя

Страница: 53 / 69

SBC82610 Half-size All-in-One CPU Card Series User’s Manual
Award BIOS Utility
47
UART 2 Mode
This item allows you to select UART mode. By default, this field is set to
Standard .
IR Function Duplex
This item allows you to select the IR half/full duplex function.
TX,RX inverting enable
This item allows you to enable the TX, RX inverting which depends on
different H/W requirement. This field is not recommended to change its
default setting for avoiding any error in your system.
Onboard Parallel Port
This item allows you to determine access onboard parallel port controller
with which I/O address.
The choice: 3BC/IRQ7, 378/IRQ7, 278/IRQ5, Disabled.
Onboard Parallel Mode
Select an operating mode for the onboard parallel (printer) port. Select
Normal, Compatible, or SPP unless you are certain your hardware and
software both support one of the other available modes.
The choice: SPP, EPP, ECP, ECP+EPP.
ECP Mode Use DMA
Select a DMA channel for the parallel port for use during ECP mode.
The choice: 3, 1.