AXIOMTEK SBC81206 Series, Руководство пользователя

Страница: 53 / 74

SBC81206 PICMG1.0
SBC User’s Manual
PHOENIX-AWARD BIOS Utility 47
5.10 PnP/PCI Configuration Setup
This section describes the configuration of PCI (Personal Computer Interconnect) bus system,
which allows I/O devices to operate at speeds close to the CPU speed while communicating
with other important components. This section covers very technical items that only
experienced users could change default settings.
 PNP OS Installed
Select Yes if the system operating environment is Plug-and-Play aware (e.g., Windows 95).
The default value is
“No”
.
 Init Display First
This item allows you to decide whether PCI Slot or AGP to be the first primary display card.
 Reset Configuration Data
Normally, you leave this item Disabled. Select Enabled to reset Extended System
Configuration Data (ESCD) when you exit Setup or if installing a new add-on cause the system
reconfiguration a serious conflict that the operating system can not boot. Options: Enabled,
Disabled.
 Resources Controlled By
The Award Plug and Play BIOS can automatically configure all boot and Plug and
Play-compatible devices. If you select Auto, all interrupt request (IRQ), DMA assignment, and
Used DMA fields disappear, as the BIOS automatically assigns them. The default value is
“Manual”
.