AXIOMTEK SBC81206 Series, Руководство пользователя

Страница: 47 / 74

SBC81206 PICMG1.0
SBC User’s Manual
PHOENIX-AWARD BIOS Utility 41
IDE Primary/Secondary Master/Slave PIO
The four IDE PIO (Programmed Input/Output) fields let you set a PIO mode (0-4) for each of
the four IDE devices that the onboard IDE interface supports. Modes 0 to 4 provide
successively increased performance. In Auto mode, the system automatically determines the
best mode for each device.
IDE Primary/Secondary Master/Slave UDMA
Select the mode of operation for the IDE drive. Ultra DMA-33/66/100/133 implementation is
possible only if your IDE hard drive supports it and the operating environment includes a DMA
driver. If your hard drive and system software both support Ultra DMA-33/66/100/133, select
Auto to enable UDMA mode by BIOS.
On-Chip Serial ATA Setting

SATA Mode
There are these options for you to set up SATA mode: IDE or RAID.
 On-Chip Serial ATA
Use this item to enable or disable the built-in on-chip serial ATA.

SATA PORT Speed Settings
Use this item to select SATA I or SATA II device support forcedly.
 PATA IDE Mode
Use this item to set the PATA IDE mode. When set to Primary, P1 and P3 are Secondary; on
the other hand, when set to Secondary, P0 and P2 are Primary.
 SATA Port
When
the “PATA IDE Mode“ is Primary, SATA Port will be ” P1, P3 is Secondary” that means
SATA 2 and SATA 4 are Secondary; when Secondary, it will be
“P0, P2 is Primary “, SATA 1
and SATA 3 are Primary.
Press <Esc> to return to the Integrated Peripherals page.