AXIOMTEK SBC81206 Series, Руководство пользователя

Страница: 17 / 74

SBC81206 PICMG1.0
SBC User’s Manual
Board and Pin Assignments 11
2.4.2 VGA Connector (VGA1)
The VGA connector VGA1 is a standard 15-pin connector commonly used for the CRT
VGA display.
Pin Signal
1 Red
2 Green
3 Blue
4 N.C
5 Ground
6 Ground
7 Ground
8 Ground(GND)
9 +5V
10 Ground (GND)
11 N.C
12 DDC DATA
13 Horizontal Sync
14 Vertical Sync
15 DDC CLK
2.4.3 Ethernet RJ-45 Connectors with LED (LAN1, LAN2)
The board is equipped with two high performance Plug and Play Ethernet interface fully
compliant with the IEEE 802.3 standard. To connect the board to 10-Base-T, 100-Base-T
or 1000 Base-T hub, just plug one end of cable to the Ethernet connector and connect
the other end (phone jack) to a 10-Base-T, 100-Base-T or 1000 Base-T hub.
Pin Signal
1 RJ-1(For 1000 base T-Only)
2 RJ-1(For 1000 base T-Only)
3 Rx- (Data reception negative)
4 RJ-1(For 1000 base T-Only)
5 RJ-1(For 1000 base T-Only)
6 Rx+(Data reception positive)
7 Tx- (Data transmission negative)
8 Tx+ (Data transmission positive)
A Active LED
B 100 LAN LED(Green)/
1000 LAN LED(Orange)