AXIOMTEK ETM830 Series, Руководство пользователя

Страница: 47 / 64

ETM830 All-In-One ETX v3.01 SoM User’s Manual
Award BIOS Utility
43
z Super IO Device
Scroll to this item and press <Enter> to view the sub menu Super
IO Device.
¾ Onboard FDC Controller
Select Enabled, if your system has a floppy disk controller
(FDC) installed on the system board and you want to use it.
If you install and-in FDC or the system has no floppy drive,
select Disabled in this field. Options: Enabled and Disabled.
¾ Onboard Serial Port 1/2
Select an address and corresponding interrupt for the serial
port. Options:
3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ10, 2E8/IRQ11,
338/IRQ5, 238/IRQ7, Auto and Disabled .
¾ URAT Mode Select
When UART Mode Select is set as ASKIR or IrDA, the
options RxD, TxD Active and IR Transmittion delay will
appear.
¾ RxD, TxD Active
When the IR transmission is enabled, you can set up speeds
of reception (RxD) and transmission (TxD).
¾
IR Transmission Delay
Enable or disable this item to decide if the IR transmission
delay function will be set or not while transferring to the