AXIOMTEK ETM830 Series, Руководство пользователя

Страница: 45 / 64

ETM830 All-In-One ETX v3.01 SoM User’s Manual
Award BIOS Utility
41
automatically remove the IDE Primary Master/
Slave PIO and/or IDE Secondary Master/Slave
PIO items on the menu.
¾ IDE Primary/Secondary Master/Slave PIO
The four IDE PIO (Programmed Input/Output) fields let you
set a PIO mode (0-4) for each of the four IDE devices that
the onboard IDE interface supports. Modes 0 to 4 provide
successively increased performance. In Auto mode, the
system automatically determines the best mode for each
device.
¾ IDE Primary/Secondary Master/Slave UDMA
Select the mode of operation for the IDE drive. Ultra DMA-
33/66/100/133 implementation is possible only if your IDE
hard drive supports it and the operating environment
includes a DMA driver. If your hard drive and system
software both support Ultra DMA-33/66/100/133, select Auto
to enable UDMA mode by BIOS.
*** On-Chip Serial ATA Setting ***
¾ On-Chip Serial ATA
Use this item to enable or disable the built-in on-chip serial
ATA.
¾ PATA IDE Mode
Use this item to set the PATA IDE mode. When set to
Primary, P1 and P3 are Secondary; on the other hand, when
set to Secondary, P0 and P2 are Primary.
¾ SATA Port
If the “PATA IDE Mode“ is Primary, it will show ” P1, P3 is
Secondary” which means SATA 2 and SATA 4 are
Secondary. If the “PATA IDE Mode “ is Secondary, it will
show “ P0, P2 is Primary “ which means SATA 1 and SATA
3 are Primary.
Press <Esc> to return to the Integrated Peripherals page.