UMAX141100 Version 1.0.6.
Preliminary Documentation – May be subject to change
17 - 36
2.8.
Miscellaneous
Settings
Figure 9 – Miscellaneous settings
The miscellaneous settings consist of setting the CAN2BT device to the configuration mode, and
exiting the configuration mode. The CAN2BT device can be also SW reset and the CAN bootloader
can be started for firmware updates (please also see section 8).
The
Enter Configuration
mode requires the user to enter the current Configuration PIN number. In
case the smart device is disconnected from the CAN2BT device during configuration, the CAN2BT
device automatically exits the confitguration mode.
SW Reset
will reset the CPU of the CAN2BT device.
Start bootloader
will set the start bootloader
flag and then reset the CPU. This makes the CAN2BT device enter the firmware reflash mode, and
it will be visible on the CAN bus and accessible from EA as Bootloader #1 (please see section 8 for
more detailed description of firmware reflashing).
Default settings
will restore factory default
settings and then reset the CPU.
Bluetooth ID
allows the user to configure the name that device will advertise. The default is
“CAN2BT”. In case there are multiple CAN2BT devices in range, it might be advantageous to
configure unique names to different controllers. The Bluetooth ID accepts charaters in range 0x20
(‘space’) to 0x7E (‘~’) and can hold up to 248 characters.
The configured Bluetooth ID is also available in the J1939 Software ID (SPN 234).
In case the CAN2BT device is not in configuration mode and the user tries to configure it, the
configuration commands return non-zero values.
