PEE1V03
20-11- 2017
21
Fig.6.2. Viewing the readings in verification (test) mode
- short press (
3 s) -
shift to the right
- long press (
3 s)
–
shift down)
Viewing the readings in verification (test) mode ( Service menu)
ID
Parameter
Value
Description
4.1
High- resolution energy
INT
INF
BIL
INT
INF
BIL
It is updated every second if the test mode is
made active
4.2
High-resolution integrated
volume
INT
INF
BIL
INT
INF
BIL
It is updated every second if the test mode is
made active
4.3
Number of pulses of 1st
pulse input
INT
INF
BIL
4.4
Number of pulses of 2nd
pulse input
INT
INF
BIL
4.5
Temperature of heat
conveying liquid in flow
pipe
INT
INF
BIL
4.6
Temperature of heat
conveying liquid in return
pipe
INT
INF
BIL
4.7
Temperature difference
INT
INF
BIL
4.8
Actuation of flow
simulation
INT
INF
BIL
During test, the value of flow is constantly
displayed.
After the ending of test, the values of energy and
quantity of a liquid are registered in memory till the
successive test or before following actuating of the
flow simulation
4.9
High-resolution flow rate
INT
INF
BIL
