PEE1V03
20-11- 2017
20
INT
INF
BIL
Tariff
INT
INF
BIL
INT
INF
BIL
Tariff condition:
INT
INF
BIL
3.14*
2
nd
pulse input/output configuration
Similarly ID 3.13,
only „1“,changes in
the „2“
See 3.13
3.15
Type of heat-conveying liquid
Type of heat-conveying liquid:
“---“ (crosses) - water
3.16
Pressure value for energy calculations
"160E4"-corresponds to the
pressure 1.6 MPa
3.17*
Customer number
INT
INF
BIL
Are transferred on telegram Mbus
3.18
Software version number
3.19
Serial number
3.20*
MBus adress
INT
INF
BIL
3.21
Working hours without a power
calculation error
INT
INF
BIL
3.22*
Battery operation time
INT
INF
BIL
Remark:
Values of the parameters marked with "*" and energy measurement units (kWh, MWh, Gcal or GJ)
can be modified by installing a meter. Replacement is possible via optical interface and in conjunction with the
special configuration programme
in a test mode, when jumper is set ( see p.6.4)
.
In the same way it is possible to switch off indication of irrelevant parameters.
6.3.2. Viewing the readings in TEST mode (Service menu)
The menu structure in a test mode is presented in the Fig 6.2
