Do not stare into beam!
Avoid direct eye exposure!
This tool emits a laser radiation!
2. Tool components
A.Measuring reference: Distance measurement is counted from end of the tool
B.Marking / hanging hole: As a marking hole of detected object’s edge when detecting; as a hanging
hole to assistant fix the tool when laser marking.
C.LCD with backlight: Indicates detecting or measuring result.
D.Mode switch: Set the mode for wood joists, AC live wires or metals.
E. +/= :Addition key: Add the measured length, area or volume
F. Detection button: Press the button to detect when detecting.
G. READ: On/read key: Press this key to start the tool and read the measured distance, keep pressing
this key and move the tool to read dynamic result.
H. RM: Memory read key: Read out and display the result of length, area or volume which is stored
last time
I. Ultrasonic sensor aperture
J. Laser pointer
K. Function switch: Select mode for laser mark, distance measure or detection.
