4) Read the temperature in the LCD display.
5) Push SEL button to shift the unit of ℃ or °F
6.6. NCV (Non-Contact Voltage) Detection
WARNING:
Due to external interference source, this function may cause wrong voltage detection, the detection result
is for reference only.
Set the rotary switch to NCV position, contact the top part of meter with the circuit under test,
the indicating LED will flash and audible signal will sound.
NOTE:
� The detection result is for reference, do not determine the voltage by NCV detection ONLY.
� Detection may interfere by socket design, insulation thickness and other variable conditions.
� The external interference sources, such as flashlight, motor, etc, may cause the wrong detection.
6.7. LINE (Live Wire Recognition) Test
Set the rotary switch to LINE position, connect the black test lead to COM jack and red test lead to VΩmA
jack, hold the insulation part of black test lead and not put into circuit under measurement; contact the
red test lead to live wire, the buzzer of meter will be activated and red LED will be flickered, when the red
test lead connect the earth line, the buzzer does not sound and LED will not flicker.
NOTE:
When the circuit is in serious leakage (approx. over 15V), the red test lead even contact earth line, the
buzzer of meter will be sounded and LED will be flickered.
6.8. Display Backlit
Press the
button for 1 or 2 seconds to turn on or off the display backlit function, the backlight will
automatically turn off after 10 seconds.
7. MAINTENANCE
7.1.
WARNING:
To avoid electric shock, disconnect the test leads from any source of voltage before removing the back cover
or the battery or fuse covers.
Содержание AX-102
Страница 1: ...AX 102 User s Guide 1...
