Manufacturer
AXING AG
Gewerbehaus Moskau
8262 Ramsen
EEA contact address
Bechler GmbH
Am Rebberg 44
78239 Rielasingen
State of the art 2021-02-02
Technical improvements, changes in design, printing- and other errors reserved.
Observe the safety instructions supplied with the device!
They are also available at the following Internet address:
https://download.axing.com/BAs/Sicherheitshinweise_9sprachig.pdf
Use the device only as described in these operating instructions and in
particular in accordance with the state of the art.
If the device is used for other purposes, no warranty will be assumed!
Technical data:
SES 5216-06
premium
-line
Single cable multiswitch II (SCR)
Operation instructions
CE Confirmation Declaration
Hereby, AXING AG declares that the device is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet
address:
https://axing.com/en/downloads/ce/
WEEE Nr. DE26869279 | Electrical and electronic components must not be disposed of
as residual waste, it must be disposed of separately.
Type
SES 5216-06
Inputs
Number
5
Frequency range
5…862 MHz @ TERR
250…2350 MHz @ SAT
LNB voltage
18 V
Level (AGC)
60… 90 dBµV
Isolation V | H.
25 dB
Subscriber ports
Number
2
Supported standards
EN 50494, EN 50607
Tap loss TERR
17 dB ±2,0 dB
Frequency range (SAT)
950…2150 MHz
User bands
2 × 16
User band frequencies*
975/1025/1075/1125/1175/1225/1275/1325 MHz
@ EN 50494/50607
1375/1425/1475/1525/1575/1625/1675/1725 MHz
@ EN 50607
Output level SAT (SCR/CSS)
98 dBµV ±2,0 dB
Output level SAT (Legacy)
85 dBµV ±2,0 dB
Current consumption from STB (SCR/
CSS)
180 mA
Current consumption from STB
(Legacy)
60 mA
Trunk outputs
Number
5
Through loss TERR
2 dB ±1,0 dB
Through loss SAT
2 dB ±2,0 dB
Connectors
Connector type
Return loss
≥ 10 dB
General
Operating voltage
18 VDC
Current consumption
max. 250 mA
Connector DC
F-female
Maximum supply current
1 A**
Equipotential bonding connection
4 mm²
Operating temperature range
(acc. to EN 60065)
-20…50°C
Dimensions (W × H × D) appr.
140 x 100 x 63 mm
Comments
* Customised user band configuration possible.
** The LNBs, the SES 5216-06 and any connected
cascade units are supplied via the DC input.
Field of application:
The devices are only suitable for distributing radio and television signals
inside the house! If a device is used for other purposes, no warranty is given!
