Manufacturer
AXING AG
Gewerbehaus Moskau
8262 Ramsen
EEA contact address
Bechler GmbH
Am Rebberg 44
78239 Rielasingen
State of the art 2018-12-19
Technical improvements, changes in design, printing- and other errors expected.
Safety advices:
The installation of the device must be carried out only by a professional in
accordance with the applicable VDE directives. In case of incorrect installati-
on, no liability is assumed.
Never open the device. There are no parts to be maintained by the user inside
the device, however, lethal voltages are present. This also applies to cleaning
the device or working on the connections.
Use only the mains cable connected to the device or the enclosed power
supply unit. Never replace any parts or make any modifications to the mains
cable and the power supply unit. Otherwise, there is a risk of death.
If a replaceable fuse is available, pull out the mains plug before replacing
the fuse. Replace defective fuses only by standardized fuses with the same
nominal value.
If you intend not to use the device for a longer period of time, we recom-
mend you to completely disconnect the device from the mains for safety
reasons and for saving energy by pulling out the mains plug.
Let the device adjust to the room temperature before commissioning, in
particular if condensation is present on the device, or if it was exposed to
large temperature fluctuations.
The device must be operated only in moderate climate.
The device must be operated only in dry rooms. In damp rooms or outdoors,
there is a risk of short-circuits (attention: risk of fire) or electrical shocks
(attention: risk of death).
The device shall not be exposed to dripping or splashing. Do not place
objects filled with liquids such as vases on the device.
Plan the mounting or installation location such that you can easily reach the
mains plug and interrupt the electric circuit in dangerous situations. Select
the mounting or installation location such that children cannot play near the
device and its connections without supervision. The mounting or installation
location must allow a safe installation of all connected cables. Power supply
cables and supply cables must not be damaged or squeezed by any objects.
Operate the device only on a flat, firm surface and protect it against uninten-
tional movements.
Never expose the device to direct solar irradiation and avoid direct vicinity of
heat sources (e.g. heaters, other electrical appliances, fireplace, etc.). It must
be always ensured that devices with cooling elements or ventilation slots are
not covered or obstructed.
Ensure generous air circulation around the device. This will prevent possible
damage to device and risk of fire due to overheating. It must be always
ensured that cables are not located near heat sources (e.g. heaters, other
electrical appliances, fireplace, etc.).
The unit must be wall mounted with at least 5 cm clearance along the 4
sides. For 19-inch rack mounting, there must be at least 5 cm clearance in
front of and behind the unit.
In particular, the warranty and liability shall be excluded for the consequen-
ces of incorrect use, in case of incorrect modifications or repair work carried
out by the customer. Use the device only as described in the operating
instructions and in particular according to the state-of-the-art.
The antenna system must be installed and grounded according to the current
DIN EN 60728-11 standard.
HKM 40-00
premium
-line
HDMI | DVB-C/T
encoder/modulator
Quick start guide
Technical data:
Herewith AXING AG declares that the marked products comply with the valid
guidelines. You can call up the complete EU declaration of conformity for
download by entering the article in the search field at www.axing.com.
WEEE Nr. DE26869279 | Electrical and electronic components must not be
disposed of as residual waste, it must be disposed of separately.
Number of inputs
4 × HDMI
Video Encoder
H.264
Intput video resolution
1080p@50 Hz | 1080p@60 Hz
Max. bit rate per channel
16 Mbit/s
Audio Encoder
MPEG1 audio layer II
Output frequency range
45......862 MHz
Output channels adjustable
E2.....E69
Output level adjustable
90…105 dBµV
Output modulation
QAM 16/32/64/128/256 | QAM 16/64
Output video resolution
1080p@25 Hz | 1080p@30 Hz
Output transmission symbol rate
1-7,5 M‘Symbol sec
Output modulation MER
≥ 40 dB @ DVB-C | ≥ 36 dB @ DVB-T
Output modulation FEC (DVB-T)
1/2, 2/3, 3/4, 5/6, 7/8
Output guard interval (DVB-T)
1/4, 1/8, 1/16, 1/32
Output connector
1 × F
Output test port
1 × F | -30 dB
Data interface
1 × RJ45
Operation voltage
100…240 VAC/50…60 Hz
Power consumption
50 W
Ambient temperature range (acc. to
EN 60065)
-10°C…+50°C
Dimensions (W × H × D) appr.
480 × 253 × 47 mm
