BZU 10-00
Signal tester CATV
Operation Instructions
Safety advice:
4
Switch off all devices befor the Installation
4
Installation and repairs to the equipment may only be carried out by
technicians observing the current VDE guidelines. No liability will be
assumed in the case of faulty installation and commissioning.
4
Before opening the equipment remove the power supply, otherwise
there is danger of of short-circuit. This is also valid for cleaning the
equipment or working on the connections.
4
The equipment may only be operated in dry rooms. In humid rooms or
outdoors there is danger of short-circuit (caution: risk of fire).
4
Choose the location of installation or mounting such that children may
not play unsupervised near the equipment and its connections. The
location of installation or mounting must allow a safe installation of all
cables connected. Power feeding cables as well as feeder lines may not
be damaged or clamped by objects of any kind. To prevent damage to
your equipment and to avoid possible peripheral damages, the devices
foreseen for wall mounting may only be installed on a flat surface.
4
Choose the location of installation or mounting so that under no
circumstances liquids or objects can get into the equipment (e.g.
condensation, water coming from leaking roofs or flowing water, etc.).
4
Avoid exposure of the equipment to direct sunlight and to other heat
sources (e. g. radiators. other electrical devices, chimney, etc.). Devices
that are equipped with heat sinks or ventilation slots must under no
circum-stances be covered or blocked. Also ensure for a generous air
circulation around the equipment. In this way you avoid possible
damage to the equipment as well as a risk of fire caused by overheating.
Absolutely avoid that cables come near any source of heat (e.g.
radioators, other electrical devices, chimney, etc.).
Technical specifications:
Operating voltage ..................................................................9 V DC battery
Max.current ..............................................................................50 mA (max)
Power consumtion ...........................................................................450 mW
Frequency range
Analogue ......................................................188…230 MHz (CH 7...CH 12)
Digital ................................................................334...374 MHz (S 25...S 29)
Impedance........................................................................................75 Ohm
Connectors.................................................................................1 x F female
Level range ...............................................................................60...95 dBµV
Resolution.......................................................................5 dBµV ± 2,5 dBµV
Dimensions.........................................................................60x 120x 26 mm
WEEE Nr.
DE14023300
Your device is marked with the WEEE symbol (Waste Electronics
and Electrical Equipment). This means that the electrical and
electronic components must not be disposed of as residual waste.
Used electrical and electronic components must be disposed of
separately.
State of the art
6-08-08 Technical changes, design modifications,
201
errors and misprints are subject to change without prior notice.
Manufacturer
AXING AG
Gewerbehaus Moskau
8262 Ramsen
EWR contact adress
Bechler GmbH
Am Rebberg 44
78239 Rielasingen
