background image

 

incorporates an isolating switch providing full disconnection 

from the power supply. 

 

Failure to install the appliance correctly could invalidate any 

warranty or liability claims. 

1.3    Operation and maintenance 

1.3.1    Electrical Shock Hazard 

 

Do not cook on a broken or cracked cooktop. If the cooktop 

surface should break or crack,switch the appliance off 

immediately at the mains power supply (wall switch) and 

contact a qualified technician. 

 

Switch the cooktop off at the wall before cleaning or 

maintenance. 

 

Failure to follow this advice may result in electrical shock or 

death. 

1.3.2    Health Hazard 

 

This appliance complies with electromagnetic safety 

standards. 

 

However, persons with cardiac pacemakers or other 

electrical implants (such as insulin pumps) must consult with 

their doctor or implant manufacturer before using this 

appliance to make sure that their implants will not be 

affected by the electromagnetic field. 

 

Failure to follow this advice may result in death. 

1.3.3 Hot Surface Hazard 

 

During use, accessible parts of this appliance will become 

hot enough to cause burns. 

 

Do not let your body, clothing or any item other than 

suitable cookware contact the Induction glass until the 

surface is cool. 

 

Metallic objects such as knives, forks, spoons and lids should 

not be placed on the hob surface since they can get hot 

 

Keep children away. 

 

Handles of saucepans may be hot to touch. Checksaucepan 

handles do not overhang other cooking zones that are on. 

Keep handles out of reach of children. 

 

Failure to follow this advice could result in burns and scalds. 

Содержание i-Smart 604F


























Отзывы: