24
9.5 Adjusting the bracket position
Fix the hob on the work surface by screw 4 brackets on the bottom of hob(see picture) after installation.
Adjust the bracket position to suit for different table top thickness.
9.6 Cautions
1. The induction hotplate must be installed by qualifiedpersonnel or technicians. We have professionals at
yourservice. Please never conduct the operation by yourself.
2. The hob will not be installed directly above adishwasher, fridge, freezer, washing machine or
clothesdryer, as the humidity may damage the hob electronics
3. The induction hotplate shall be installed such thatbetter heat radiation can be ensured to enhance
itsreliability.
4. The wall and induced heating zone above the tablesurface shall withstand heat.
5. To avoid any damage, the sandwich layer and adhesivemust be resistant to heat.
9.7Connecting the hob to the mains power supply
This hob must be connected to the mains power supply only by a suitably qualified person.
Before connecting the hob to the mains power supply, check that:
1. The domestic wiring system is suitable for the power drawn by the hob.
2. The voltage corresponds to the value given in the rating plate
3. The power supply cable sections can withstand the load specified on the rating plate.
To connect the hob to the mains power supply, do not use adapters, reducers, or branching
devices, as they can cause overheating and fire.
The power supply cable must not touch any hot parts and must be positioned so that its
temperature will not exceed 75˚C at any point.
Check with an electrician whether the domestic wiring system is suitable without alterations.
Any alterations must only be made by a qualified electrician.
