Installing hardware (controllers, readers etc.)
Hardware is normally found automatically by VAKA and installed (in the software) automatically.
When you want to add hardware that is not physically installed, it can be installed manually in the
software.
Before installing controllers in VAKA, make sure that the control pan-
els are correctly addressed.
Automatic installation
1. Click on the dialog that says
New hardware has been found.
2. Select the devices to be installed and click
Install.
3. Follow the instructions in VAKA.
Manual installation
1. Click
Settings > Installation > Door controller, Installing terminals/modules.
2. Select
Add device manually and click Next >.
3. Follow the instructions in VAKA.
7 (8)
Quick guideVAKA 3.80
