Installation
Installation Guide - Models 95
3
2 - INSTALLATION
2.1 - DESCRIPTION
A green LED on the front face indicates when the AX3000 Thin Client is
powered on.
The AX3000 Thin Client has the following connectors and switches on the rear
panel:
- Power switch,
- Power connector,
- VGA or SVGA connector,
- Display Port ++ connector,
- Two auxiliary serial ports: RJ45 (AUX1 and AUX2),
- Auxiliary parallel port: female 25-pin (PARALLEL),
- Ethernet port: RJ45 (LAN).
Four USB ports are located on the left side of the terminal case.
11 12 1
2
3
4
5
6
7
On/Off Pow. VGA DP++
Aux1 Aux2
Parallel
Ethernet
USB (1 à 4)
Power Inlet:
100 - 240 V~
0.2 - 0.1 A
50 - 60Hz
Safety
Connectors
Low Voltages (SELV)
maximum length
1 - VGA
3 m shielded
2
– DP ++
3 m shielded
3 - Serial1
3 m shielded
4 - Serial2
3 m shielded
5 - Parallel
3 m shielded
6 - LAN
100 m shielded (CAT 6 S/FTP)
7 - USB (4 ports)
3 m shielded