Notices
Installation Guide - Models 95
1
1 - NOTICES
1.1 - SAFETY NOTICES
Do not attempt to fix a
AX3000 M95
Thin Client component failure by
opening the terminal case
. In case of hardware failure, contact your service
representative.
Ensure that the supply voltage of the wall outlet is in accordance with the
indications on the AX3000 M95 nameplate.
The wall power outlets used must be reached easily and as nearest as
possible to the AX3000 M95 Thin Client to connect or disconnect the power
cords.
Make sure to power off the thin client before connecting or disconnecting any
device (monitors, keyboard, mouse and serial or parallel cables.
To install and connect any peripherals, refer to the respective supplier
installation manuals.
1.2 - ELECTROMAGNETIC COMPATIBILITY (EMC)
In order to ensure compliance with European EMC regulations and FCC Part
15 rules, it is required that shielded cables be used when interfacing with other
devices (peripherals or computers).
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off