Axel AX3000 Platine 65E Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 22

Axel AX3000 Platine 65E Скачать руководство пользователя страница 13

Quick Installation

Installation Guide - Models 95

9

3.2 - AUTO-CONFIGURATION

The Auto-

Configuration feature allows a brand new ‘out of the box’ terminal to

be  sent  a  specific  firmware  and/or  configuration  file  without  any  human
intervention.  There  are  also  options  to  specify  various  terminal  specific
parameters, for example an IP address and terminal name etc.

Note

: the auto-configuration mechanism requires AxRM software (available free

from

For more information on AxRM’s action in the auto-configuration process, see
the manual "Axel Remote Management ".

The auto-configuration process is automatically initiated when power is applied
to a brand new terminal or if the terminal is reset to factory defaults. This
process may be aborted by pressing any key.

Note

: the auto-configuration may also be started at each terminal boot time.

The stages are:

- Checking the network (link),
- DHCP request sent to obtain an IP address and other parameters

(optional),

- Terminal contacts the AxRM server,
- Firmware file sent (if required), followed by a reboot,
- Configuration file sent, followed by a reboot.

«
...
11
12
13
14
15
...
»

Содержание AX3000 Platine 65E























Отзывы:

Нет отзывов